Plastic Lumber - .75" X 8" x 144" HDPE Recycled 3010.2

3010.2 HDPE (High-Density Polyethylene) Wallguard

 .75" Thick x 8" High x 144" Long

Heavy duty impact resistant material made from 100% post-consumer recycled plastic. Minimum quantities apply (see below).

• Easy to install—simply cut and drill with ordinary woodworking equipment
• Waterproof and chemical resistant
• For interior or exterior use
• Standard Lengths: 12 Ft.
• HDPE color chips available

Installation: HDPE products is installed with the same tools used to work wood lumber. The product will cut and drill very cleanly, as there is no grain to split or chip. For exposed fasteners, it is not necessary to pre-drill the plastic lumber when fastening. For non-exposed fasteners, material can be drilled with a plug hole cutter, affixed to the wall and holes plugged with drilled material. Material can be beveled in the field for contoured ends. Stainless steel or coated decking nails and screws are recommended for use with HDPE products. Screws offer the best form of attachment.