Satin Finish Stainless Steel Corner Guard Type 304

We provide FREE adhesive with the standard undrilled version.

The 2230 16 ga stainless steel corner guard is type 304 stainless with a satin finish. The staindard 2330 16 ga corner guards are provided undrilled with FREE adhesive included for installation. You may also order the 2330 16 ga either standard or countersunk drilled. Additional options for the 2330 are sharp 135 degree and bullnose 135 degree.

Sharp 90°	Sharp 135°	Bullnose 135°

Standard Lengths: 2-10 ft.

90° profile available in these standard wing sizes:

• 2" (2330.1)
• 1" (2330.2) - if purchasing countersunk drilled wings will not be crimped
• 3-1/2" (2330) or bullnose (2330.3)

135° profile:

• 3-1/2" (2330.4)
• 3-1/2" bullnose (2330.5)

Endwalls (4-7/8" standard partition width, can fabricate to any width.

• 3-1/2" (2330B)
• 2" (2330B.1)
• 1" (2330B.2) - if purchasing countersunk drilled wings will not be crimped

Also available in custom lengths, angles and wings.

Bullnose profiles will not fit on a standard sharp corner. They fit on rounded corners only.

SPECIFICATIONS

For undrilled profiles, adhesive is included for installation and yes, mounting screws are included for drilled versions